Two press lines are used in the production of pipes:
- a press with a pressure of 2,000 tons for the production of pipes with a diameter of 42 – 114 mm
- press with a pressure of 5500 tons for the production of pipes with a diameter of 114 – 273 mm
The length of the pipes offered is from 2 to 24 meters.
The available equipment of the plants allows the production of a wide range of high-quality pipes with a diameter of 1.6 to 273 mm.
It is also possible to produce pipes with an inner or outer surface of high quality, including electrochemical polishing. The plants use various methods of pipe quality control, including visual, ultrasonic and eddy currents.
The range of tubes produced:
outer diameter – from 1.6 to 273 mm
wall thickness – from 0.2 to 28 mm
pipe length – up to 24,000 mm
Steel grades (EN)
1.4000, 1.4003, 1.4006, 1.4016, 1.4021, 1.4028, 1.4031, 1.4034, 1.4057, 1.4122, 1.4301, 1.4305, 1.4306, 1.4307, 1.4310, 1.4401, 1.4435, 1.4436, 1.4438, 1.4439, 1.4529, 1.4539, 1.4541, 1.4547, 1.4550, 1.4571, , 1.4510, 1.4362, 1.4410, 1.4460, 1.4462.
Other grades can be produced on request.
Steel grades (GOST)
08-12X18н10T, 08-12X1818H12T, 10X17H13M2T, 02-03X18H11, 03X17H14M3, 08X13, 15X25T, 08X14MФ, 10X23H18, 12X17, 06XH28MДT, 08X22H6T, XH78T, XH60BT, BT 1-0, ΠT-7M, ΠT-1M XH65MBУ, 09X18H9, 48HX, 08X15H5Д2T-Ш etc.
Steel grades (ASTM)
304, 304L, 310, 316, 316L, 316Ti, 321, 321h, 347, 409, 430, 439, 904.
Other grades can be produced on request.
Standards
GOST 9941, GOST 9940, GOST 19277, GOST 10498, GOST 14162, GOST 22897, TU 14-3P-197, TU 14-3P-55, TU 14-3-460, TU 14-161-216, TU 1361-023-00212179, TU 14-3-571, TU 14-3-820, TU 14-3-615, ASTM A312, ASTM A213, ASTM A269, DIN 17456, DIN 17458 etc.